Usb Power feature

command message olympe.messages.usbpower.Command.GetState(include_default_capabilities=None, _timeout=10, _no_expect=False, _float_tol=(1e-07, 1e-09), _int_tol=0)

Parameters:

include_default_capabilities : bool

Supported by:

ANAFI_3_INSPECT:

for firmware release versions 8.3.0

ANAFI_3_MIL:

for firmware release versions 8.3.0

ANAFI_3_GOV:

for firmware release versions 8.3.0

command message olympe.messages.usbpower.Command.Power(connector_type=None, enabled=None, _timeout=10, _no_expect=False, _float_tol=(1e-07, 1e-09), _int_tol=0)

Parameters:

connector_type : olympe.enums.usbpower.ConnectorType

enabled : bool

Supported by:

ANAFI_3_INSPECT:

for firmware release versions 8.3.0

ANAFI_3_MIL:

for firmware release versions 8.3.0

ANAFI_3_GOV:

for firmware release versions 8.3.0

event message olympe.messages.usbpower.Event.State(default_capabilities=None, usb_powers=None, _policy='check_wait', _float_tol=(1e-07, 1e-09), _int_tol=0)

Parameters:

default_capabilities : olympe.messages.usbpower.Capabilities()

usb_powers : olympe.messages.usbpower.Powers()

Supported by:

ANAFI_3_INSPECT:

for firmware release versions 8.3.0

ANAFI_3_MIL:

for firmware release versions 8.3.0

ANAFI_3_GOV:

for firmware release versions 8.3.0

message olympe.messages.usbpower.Capabilities(supported_types=None, _float_tol=(1e-07, 1e-09), _int_tol=0)

Parameters:

supported_types : list(olympe.enums.usbpower.ConnectorType)

Supported by:

ANAFI_3_INSPECT:

for firmware release versions 8.3.0

ANAFI_3_MIL:

for firmware release versions 8.3.0

ANAFI_3_GOV:

for firmware release versions 8.3.0

command message olympe.messages.usbpower.Power(connector_type=None, enabled=None, _timeout=10, _no_expect=False, _float_tol=(1e-07, 1e-09), _int_tol=0)

Parameters:

connector_type : olympe.enums.usbpower.ConnectorType

enabled : bool

Supported by:

ANAFI_3_INSPECT:

for firmware release versions 8.3.0

ANAFI_3_MIL:

for firmware release versions 8.3.0

ANAFI_3_GOV:

for firmware release versions 8.3.0

message olympe.messages.usbpower.Powers(powers=None, _float_tol=(1e-07, 1e-09), _int_tol=0)

Parameters:

powers : list(olympe.messages.usbpower.Power())

Supported by:

ANAFI_3_INSPECT:

for firmware release versions 8.3.0

ANAFI_3_MIL:

for firmware release versions 8.3.0

ANAFI_3_GOV:

for firmware release versions 8.3.0

enum olympe.enums.usbpower.ConnectorType

BATTERY:

BODY: